 |
STANDARD CLAMP HEATER MODELS
Non watertight heaters with steel outer plating.
Recommended maximum load 4 W/cm2.
Connections can be wired, screw terminals or plug connection.
Indicate diameter, bandwidth, power, voltage and type and status of connections.
Can include holes or notches. They can carry incorporated thermocouple. |
 |
 |
HERMETIC CLAMP HEATING MODELS
Very suitable for injection nozzles and locations are conducive to falling materials, due to its completely sealed construction. They are made of brass tube, the hood is welded to the body.
They can incorporate a thermocouple.
Technical details
| Ø mm |
Width MM. |
| 20 |
25 |
30 |
35 |
40 |
45 |
50 |
| 30 |
75 |
95 |
110/150 |
130 |
150 |
170 |
190 |
| 35 |
90 |
110 |
140 |
150 |
175 |
200 |
220 |
| 40 |
100 |
125 |
180 |
190 |
225 |
225 |
250 |
| 42 |
105 |
130 |
160 |
185 |
210 |
235 |
265 |
| 45 |
110 |
140 |
175 |
200 |
225 |
255 |
285 |
| 50 |
125 |
160 |
200 |
220 |
250 |
285 |
315 |
| 55 |
140 |
175 |
205 |
240 |
275 |
310 |
345 |
| 60 |
150 |
190 |
225 |
265 |
300 |
340 |
375 |
| 65 |
165 |
205 |
245 |
285 |
325 |
370 |
410 |
| 70 |
175 |
220 |
265 |
305 |
350 |
400 |
440 |
| 75 |
190 |
235 |
280 |
330 |
375 |
425 |
470 |
| 80 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
| 85 |
215 |
265 |
320 |
375 |
430 |
480 |
535 |
| 90 |
225 |
280 |
340 |
400 |
450 |
510 |
565 |
| 95 |
240 |
300 |
360 |
420 |
475 |
535 |
600 |
| 100 |
250 |
315 |
375 |
440 |
505 |
565 |
630 |
|
|
 |
CLAMP HEATERS WITH CERAMIC ELEMENTS
Armored heaters , non-watertight, exterior wrapped in steel plate and heating mounted on ceramic elements.
Maximum load recommendations 8 W/cm2.
Connections may be wired with screw terminals or plug connection.
Indicate diameter, width, power, voltage and type and location of connections. These can include holes or notches. They can carry incorporated thermocouple. |
|
 |
ARMOURED HEATING ELEMENT CLAMP
Sealing the armoured heating element is guaranteed in normal use.
By combining conductive heat transfer with radiation, and taking into account their specific high charge (from 6 to 10 W / cm 2) fairly high heating rates are achieved.
The working temperature reaches to 750 º C, and may control the temperature of the heater through thermocouples installed inside the armored elements.
Armored elements can be circular or flat. They are always made to order. |
|
 |
HEATING CLAMP WITH COOLING
This model, equipped with a cooling fan, is designed for applications such as plastic extrusion, which emphasize a high temperature and direct cooling.
The set is made up of one or more heater with ceramic elements, all in an enclosed outer casing in stainless steel plate fitted with a fan for cooling, with separate connection of the heating elements and equipped with a closed system to facilitate quick installation .
They are made from a minimum size of 56x120mm Ø
They can be provided with holes and brackets for thermocouple probe |
|
 |
NOZZLE HEATING CLAMP MODEL DBM
Made from WRP MAXI model, its main application is the injection nozzles of plastic, but its usefulness is extended to other industrial applications which require heat input to cylindrical surfaces, pipes, etc..
Technical details
| Power W |
Ø INT. mm. |
Length mm. |
Outputs |
Thermo-couple |
| 300 |
30,0 |
30,0 |
Rad. 45º |
- |
| 400 |
30,0 |
38,0 |
Rad. 45º |
- |
| 350 |
32,0 |
30,0 |
Tangential |
Fe-Ko (J) |
| 500 |
38,0 |
32,0 |
Tangential |
Fe-Ko (J) |
| 450 |
40,0 |
30,0 |
Rad. 45º |
- |
| 350 |
42,0 |
22,0 |
Tangential |
- |
| 450 |
44,0 |
34,9 |
Tangential |
- |
| 500 |
50,0 |
34,0 |
Rad. 45º |
- |
| 350 |
50,8 |
25,4 |
Tangential |
- |
|
|
 |
NOZZLE HEATING MODEL OHM
This consists of an external heater, model MAXI WRP with a spiral-wound exterior protection and special hoops on the ends to prevent any leaking materials affecting the heater.
The standard models feature a K thermocouple.
Technical details
| MODEL |
Ø Int. mm. |
Ø Ext. mm. |
Length. mm. |
W a 230V |
| OMH 5 |
31,5 |
49,2 |
78 |
500 |
| OMH 20 |
31,5 |
49,2 |
105 |
700 |
| OMH 50 |
42,0 |
59,7 |
172 |
1300 |
| OMH 80 |
42,0 |
59,7 |
190 |
1400 |
| OMH 125 |
50,0 |
67,7 |
335 |
1700 |
| OMH 200 |
64,0 |
81,7 |
295 |
2400 a 400V |
|
|
 |
MICROTUBE HEATER MODEL WRP / M
List of manufacturing possibilities.
Maximum power 15 W/cm2.
They can be supplied with built-in thermocouple.
Standard Outputs: axial, radial or tangential.
Technical details
| INTERNAL DIAMETER mm. |
MINIMUM LENGTH mm. |
MAXIMUM LENGTH mm. |
WALL THICKNESS mm. |
| 12-15 |
25 |
120 |
4,5-5,5 |
| 16-18 |
25 |
200 |
4,5-5,5 |
| 19-21 |
25 |
150 |
4,5-5,5 |
| 22-26 |
25 |
100 |
4,5-5,5 |
| 27-36 |
36 |
100 |
4,5-5,5 |
| 37-41 |
36 |
90 |
4,5-5,5 |
| 40 |
35 |
80 |
5,0-5,5 |
| 43 |
35 |
70 |
4,5-5,5 |
| 46 |
35 |
70 |
5,5 |
| 53 |
35 |
60 |
5,5 |
| 58 |
35 |
50 |
5,0-5,5 |
| 59 |
35 |
50 |
5,5 |
|
|
 |
ELEMENTS EMBEDDED IN FOUNDRY
The heating element is embedded within a body of cast aluminum, brass, bronzel, or iron.
They are perfectly suited to extreme operating conditions (shock, vibration etc.).
And allow us to ensure uniform heating both flat and cylindrical. The casting, gravity, is made with a sand mold or metal depending on the number of parts, and mechanical properties required. They can be equipped with inner tubes, water cooling or thermal fluid circulation for heating compressed air or other gas under pressure. Semiabrazaderas forming two are an excellent alternative for heating pipes or reactors.
TECHNICAL DETAILS
· Power Supply: single or three phase, 230/400V or other demand.
· Specific load on the element: 20 W / cm ².
· Weight limits: Aluminum brass 300 Kgs 400 Kgs
· Box or proof watertight connections.
· Electrical Connections by screw terminals or soldered onto the cable exits the heating elements.
· Manufacture and finishing on demand
· Assembly by screws.
· Lagging demand according to temperature.
RECOMMENDED WORKING TEMPERATURES
Aluminum. 400 ºC
Brass 600 º C
Bronze 650 º C
Casting 750 º C |
|
 |
FLAT HEATERS
Non watertight heaters wrapped in steel plate exterior.
Maximum load recommended 4 W/cm2.
Connections may be wired with screw terminals or plug connection.
|
|
