(ANGLÈS) Category (ENGLISH)

KBF THE RAPID MEDIUM-WAWE INFRARED RADIATOR
	The heating surface consists of a ceramic insulation material and a high-temperature metal foil. The insulation material supports the meal foil and obstructs the flow of heat to the back. A heating surface is divided up into modules . The module and heat-fi eld framework is made from aluminium or stainless steel. The radiation side is covered with a stainless steel wire grid for protection . The electrical connection comes through a fl exible metal tube or is w ired in a terminal box. The heating foils are made from a very stable and resistant material which makes them insensitive to vibrations and alternating thermal loads. The self-cleaning effect when exposed to contamination from solid condensates etc. guarantees along service life.

BSH / BSI PANEL ELSTEIN MEDIUM-WAVE INFRARED RADIATOR
	BSH PANEL MADE FROM ALUMINIUM BSI PANEL MADE FROM STAINLESS STEEL Both models can be equipped with: HTS High Performance Medium Wave Emitters HSR low inerance medium-wave emitters	bsh
		bsi

HVT SURFACE HEATING ELEMENTS
	High transparency Large surface and uniform heat development High level of thermal radiation Very short heating time through high power output with low mass High tensile strength through SPSG safety glass Long service life, no measurable wear Application examples Panel radiators in many shapes, colours and sizes Wall and ceiling heating systems, also flush mounted Drier ovens Hotplates, heating plates Window or door panel heating Mist-free windows in cold-storage depots, refrigerated displays, construction machinery Sight glasses on machines and installations Additional heating for window ledges, tiled ovens and tiled walls Heating elements for industry Heating elements for aquariums and terrariums Heating elements for indoor swimming pools and hospitals

HAP ALUMINIUM ELECTRIC HEATING PLATE
	Applications Heating of parts and moulds, wood and paper industry, automobile industry, mould-making, plastics industry, bookbinding. The HAP aluminium heating plates cover a temperature range up to 250°C and can handle extreme pressure loads and are impact and vibration resistant. Their shapes can be individually fabricated whether round, oval or L-shaped. Special designs with cut-outs, bore holes and bolt threads can be manufactured. Even combinations with liquid and air channels for cooling can be implemented.

		CRN TECNOPART, S.A. offers a wide range of heating and insulating materials for thermal industrial processes. We also provide detailed information about instruments and equipment for the regulation and the control of these processes and for applications of environmental control.

	REO Made of rustproof steel, they are designed to facilitate the assembly of panels for ELSTEIN Models . Two models of reflectors integrate on the screens EBO to form sets EBF
	EBO Made of antirust aluminum. Highly resistant to the thermal distortions. Expressly designed as a complement of the reflectors REO 125 and REO 250. Application in industrial processes.
	MBO The MBO Supports models HTS and HSR. They can be used for the construction of panel heaters. It is necessary to bear in mind the dilations that the temperature produces in the structures.
	MPO The MBO Supports models HLS and IRS. They can be used for the construction of panel heaters. It is necessary to bear in mind the dilations that the temperature produces in the structures.
	MTO The metallic base MTO it is designed as support for the SHTS 100 Model and it can be used for the construction of panels heaters. It is necessary to bear in mind the dilations that the temperature produces in the structures.

Assembly and installation accessories for ELSTEIN radiators

Assembly and installation accessories for ELSTEIN radiators

SPECIFICATIONS
MODEL		APPLICATION
	AK Ceramic terminal clamp	Bipolar ceramic terminal clamp
	Assembly clips	For assembly of radiators
	Thermo coupler cable	Compensated Cable type TCK for the connection of the thermo coupler
	Anticaloric cable	Nickel conductor with mineral or fiberglass isolation

Temperature regulators and installation accessories

Temperature regulators and installation accessories

CHARACTERISTICS
MODEL		APPLICATION
	TRD 1	Temperature regulation
	TSE	Solid State Relays

Manual regulation equipment

Manual regulation equipment

REGULATION & CONTROL

Manual regulation of the electrical potency across a potency meter. The equipment of potency is constituted by relays of solid state with entry of analogical regulation. It incorporates the protection elements and safety.

STANDARD MODELS	INTENSITY	CONTROL ZONES
CRN/REF/1M	25 A	1
CRN/REF/4M	100 A	1 to 4
CRN/REF/6M	150 A	1 to 6

TEMPERATURE REGULATION EQUIPMENT

Regulation of the temperature across a controller and a sensor. The equipment for potency is constituted by relays of solid state with entry of analogical regulation. It incorporates the protection elements and safety.

STANDARD MODELS	INTENSITY	POWER	STAGES OF REGULATION
CRN/T25	25 A	230	1
CRN/T75	75 A	230	2
CRN/T75-T	75 A	380 Triphasic	1
CRN/T150	150 A	230	1 or 2
CRN/T150-T	150 A	380 Triphasic	1 or 2

TEMPERATURE REGULATION EQUIPMENT WITH MANUAL LIMITATION OF THE MAXIMUM POTENCY

Regulation of the temperature across a controller and a sensor. The potency is constituted by relays of solid state with entry of analogical regulation. By means of a potency meter there can be regulated the maximum potency of the relays of solid state. It incorporates the safety andprotection elements.

STANDARD MODELS	INTENSITY	POWER	STAGES OF REGULATION
CRN/P25	25 A	230	1
CRN/P75	75 A	230	2
CRN/P75-T	75 A	380 Triphasic	1
CRN/P150	150 A	230	1 or 2
CRN/P150-T	150 A	380 Triphasic	1 or 2

SPECIAL REGULATION EQUIPMENT

Equipment for regulation can be designed & contructed for High potency

Elstein-Werk was established in Northeim in 1950 as the only manufacturer worldwide specialized in ceramic infrared radiators. Based on pioneering work and the continuous development of our products we have been able, in the past and in the present, to discover and develop new applications of infra-red engineering which combine outstanding technology with highly economical operation. Today you expect the heating system to be optimally adapted to the heating task when you are dealing with original equipment or the conversion or extension of existing plant or machines. Ceramic infrared radiators made by Elstein-Werk with their various sizes, wattages and thermal response offer you a wide variety of possibilities t o solve your heating and drying tasks.

FSR - LCR - HFS - FSF - HTS - SHTS - HSR - HLS - HLF - IRS - ISN - FSL - SBM - KSS/60 - RSA - RFS
SSH - IRS/K - IOT - IPT - IPO - FIS - SFH - MSH/20 - Terrarium heaters - SSV Sulphur Vaporiser

Model FSR

Elstein FSR panel emitters are ceramic infrared radiators, which are designed for operating temperatures up to 750 °C. Surface ratings of up to 64 kW/m² can be installed.

FSR series emitters are made using a full-pour casting ceramic process and are characterised by their concave design. Due to the design of this type, there is a space between the radiator and the mounting plate, which reduces the heat absorbed by the wiring space.

FSR panel radiators can be used universally and are suitable for assembling radiation areas with any geometry required. They are available in three designs and cover a power range from 60 W to 1000 W.

Technical Details
Models & Wattage at 230 V	FSR	245 x 60 mm	150	250	400	650	1000	W
	FSR/2	122 x 60 mm		125	200	325	500	W
	FSR/4	60 x 60 mm		60	100	200	250	W
Maximum Power per m² emitting surface, with EBF assembled emitters			6	10	16	26	40	kW
Surface rating			9	15	24	39	60	kW
Typical operating temperature			250	400	500	620	730	ºC
Maximum surface temperature			750	750	750	750	750	ºC
Wavelength range			2 - 10					µm
Heating-up Time (63 % of normal running temperature )			6,0	4,8	3,8	3	2,4	min
Cooling-down time to reach 200 ºC			6	7	9	11	12	min
Temperature of the material			100	150	200	250	300	ºC

Model LCR

Elstein LCR large curved radiators are ceramic infrared panel emitters, designed for operating temperatures up to 750 °C. Surface ratings of up to 60 kW/m² can be installed. LCR radiators are made using a full-pour casting ceramic process and are characterised by their large size and concave design. Due to the latter, there is a space between the radiator and the mounting plate, which reduces the heat absorbed by the wiring space. For some special applications the large size can reduce the mounting and installation work compared to the regular sizes of ceramic infrared radiators.

Technical Details
Models & wattages at 230 V	LCR	245 x 95 mm	400	600	900	1200	1500	W
Surface rating			16	24	35	48	60	kW/m²
Typical operating temperature			400	490	580	660	710	ºC
Maximum permissible temperature			750	750	750	750	750	ºC
Wavelength range			2 - 10					µm
Heating-up time (63 % of the operating temperature)			6,0	4,8	3,8	3	2,4	min
Cooling-down time to 200 ºC			6	7	9	11	12	min

Model HFS

Elstein HFS panel radiators are ceramic infrared radiators, which are designed for medium surface ratings up to 38.4 kW/m² and operating temperatures up to 700 °C.
HFS series radiators are made using a hollow casting ceramic process. Compared to ceramic IR radiators produced using the full-pour casting process, HFS radiators have a considerably shorter heating-up time.

Technical Details
Models & Wattage at 230 V	HFS	122 x 122 mm	250	400	600	W
	HFS/1	245 x 60 mm	250	400	600	W
	HFS/2	122 x 60 mm	125	200	300	W
	HFS/4	60 x 60 mm	60	100	150	W
Surface rating			16	25,4	38,2	kW
Typical operating temperature			420	510	630	ºC
Maximum permissible temperature			700	700	700	ºC
Wavelength range			2 - 10			µm
Heating-up time (63% de la temperature final)			4,2	3,7	3.3	min

Model FSF

Elstein FSF panel radiators are ceramic infrared radiators with a low overall height. They are produced using a full-pour casting ceramic process and are designed for operating temperatures up to 720 °C and surface ratings up to 64 kW/m².
Compared to other Elstein panel radiators, the overall height of the FSF radiators, measured from the radiation surface up to the mounting plate, has been reduced by approximately 45 %.

Technical Details
Models & Wattage at 230 V	FSF	122 x 122 mm	250	400	600	800	1000	W
	FSF/1	245 x 60 mm	250	400	600	800	1000	W
	FSF/2	122 x 60 mm	125	200	300	400	500	W
	FSF/4	60 x 60 mm	60	100	150	200	250	W
Surface rating			16	25.6	38,4	51,2	64	kW
Typical operating temperature			400	500	590	670	720	ºC
Maximum permissible temperature			750	750	750	750	750	ºC
Wavelength range			2 - 10					µm
Heating-up Time (63 % of normal running temperature )			3,2	2,8	2,2	2	1,8	min
Cooling-down time to reach 200 ºC			5,5	7,5	9,5	10	12	min

Model HTS

Elstein HTS high temperature radiators are ceramic infrared panel radiators, which can be used for operating temperatures up to 900 °C and surface ratings up to 64 kW/m².

HTS series radiators are produced using a hollow-casting ceramic process and are filled with thermal insulation material. This improves the radiant power output to the material to be heated. Furthermore, there is a significant reduction in heat dissipated in the wiring space, so that additional insulation of the heating area is usually not required.

Technical Details
Models & Power at 230 V	HTS	122 x 122 mm	250	400	600	800	1000	W
	HTS/1	245 x 60 mm	250	400	600	800	1000	W
	HTS/2	122 x 60 mm	125	200	300	400	500	W
	HTS/4	60 x 60 mm	60	100	150	200	250	W
Surface rating			16	25.6	38,4	51,2	64	kW/m²
Typical operating temperature			450	570	700	810	900	ºC
Maximum surface temperature			700	750	800	850	900	ºC
Wavelength range			2 - 10					µm
Heating-up Time (63 % of normal running temperature )			3,2	2,8	2,2	2	1,8	min
Cooling-down time to reach 200 ºC			5,5	7,5	9,5	10	12	min

Model SHTS

Elstein SHTS super high temperature radiators were developed to increase the previous maximum possible surface rating of ceramic panel radiators from 64 kW/m² to 77 kW/m².

The SHTS radiators, produced using the hollow casting ceramic process, are filled with thermal insulation material and have a special black glaze and a gold-plated back. At an operating temperature of 900 °C, over 75 % of the electrical energy supplied is transferred to the material to be heated as medium to long-wave IR radiation.

SHTS series radiators are therefore particularly suitable for use in plant construction in which special solutions have to be drawn up for the customer's specific needs and for applications requiring high outputs

Technical Details
Models	SHTS 100 96 x 96 mm.	800	W
	SHTS 122 x 122 mm.	1200	W
	SHTS/1 245 x 60 mm.	1200	W
	SHTS/2 122 x 60 mm.	600	W
	SHTS/4 60 x 60 mm.	300	W
Surface rating		76.8	kW/m²
Typical operating temperature		860	ºC
Maximum surface temperature		900	ºC
Wavelength range		2 - 10	µm
Heating-up Time (63 % of normal running temperature )		1,2	min
Cooling-down time to reach 200 ºC		3,25	min
MTO support for model SHTS 100 at 96x96mm.

Model HSR

Elstein HSR high speed radiators are quick-reaction ceramic infrared panel radiators, designed for operating temperatures up to 900 °C and surface ratings up to 64 kW/m².
The external characteristics of the HSR radiators is their visible heating coil, which is installed in a ceramic body. The heat released in the wiring space by this design is up to 65 % less compared to infrared radiators with a heating coil embedded in ceramic.

HSR high speed radiators are particularly suitable for use in clocked production processes, for frequent tool changes or if the temperature has to drop quickly in case of transfer disruptions, in order to prevent damage to the production plant.

Technical Details
Models & wattages at 230 V	HSR	125 x 125 mm.	250	400	600	800	1000	W
	HSR/1	250 x 62,5 mm.	250	400	600	800	1000	W
	HSR/2	125 x 62,5 mm.	125	200	300	400	500	W
Surface rating			16	26	38	51	64	kW/m²
Typical operating temperature			450	570	700	810	860	ºC
Maximum permissible temperature			900	900	900	900	900	ºC
Wavelength range			2 - 10					µm
Heating-up time (63 % of the operating temperature)			60	55	45	40	35	seg.
Cooling-down time to 200 ºC			35	30	25	20	15	seg.

Model HLS

Elstein HLS high performance radiators are ceramic infrared rod radiators, which can be used for operating temperatures up to 1000 °C and surface ratings up to 87 kW/m².

HLS series radiators have a gold-plated ceramic parabolic reflector and transfer up to 80% of the energy supplied as infrared radiation to the material to be heated.
In this way, HLS radiators allow material temperatures of up to 700 °C or high throughput speeds. The typical operating temperature of 1000 °C is reached in less than one minute.

HLS series radiators are therefore particularly suitable for use in plant construction in which special solutions have to be drawn up for the customer's specific needs and for applications requiring high outputs.

Technical Details
Models		HLS	250 x 32 mm.	750 W a 230 V
		HLS/2	125 x 33 mm.	375 W a 115 V
Surface rating				90	kW/m²
Typical operating temperature				1000	ºC
Maximum permissible temperature				1100	ºC
Wavelength range				2 - 10	µm
Heating-up time (63 % of the operating temperature)				‹ 1	min
Cooling-down time to 200 ºC				4,5	min
Temperature of the material, according its situation with regard to the emiiter				700	ºC
	Elstein MPO mounting profiles are made from stainless steel and are used to hold and fix HLS and IRS series radiators.	MPO 248 x 33 mm.
		MPO/2 122 x 33 mm.

Model HLF

Elstein HLF panel radiators are ceramic infrared emitters which can be used for operating temperatures up to 700°C and surface ratings up to 42 kW/m².

The elongated socket of the HLF radiators allows inserting of a heat insulation layer between the radiation surface and the mounting sheet.

Due to this design in connection with heat insulation the radiation efficiency of a ceramic radiator was increased significantly for the first time. On the other hand a relatively thick heating panel was the consequence.

Technical Details
Models & wattages at 230 V	HLF	122 x 122 mm	250	400	650	W
Models & wattages at 230 V	T- HLT (Models with thermocouple)	122 x 122 mm	250	400	650	W
Surface rating			16	25,4	41,6	kW/m²
Typical operating temperature			420	520	630	ºC
Maximum permissible temperature			700	700	700	ºC
Wavelength range			2 - 10			µm

Model IRS

Elstein IRS rod radiators are ceramic infrared emitter designed for operating temperatures of up to 750 °C. With the help of MPO and MPO/2 mounting profiles, surface ratings of up to 72.0 kW/m² can be realised.

IRS series radiators have one mounting socket on each side, with which they can be fixed to a mounting profile with fixing springs. The rod shaped design makes IRS radiators preferably suitable for linear heating tasks.
An example for linear heating tasks can be found in the timber industry, where IRS rod radiators are used to pre-heat edge strips.

Technical Details
Models at 230 V	IRS Ø16 x 245 mm. 95 g	-	-	-	-	400	600	W
	IRS/2 Ø16 x 122 mm. 50 g	-	-	200	300	-	-	W
	IRS/330 Ø16 x 330 mm. 120 g	250	400	-	-	-	-	W
Models with incorporated thermocouple		TCK
Typical operating temperature		400	530	550	650	550	650	ºC
Maximum permissible temperature		750	750	750	750	750	750	ºC
Wavelength range		2 - 10						µm
Heating-up time (63 % of the operating temperature)		2,4	1,7	2,4	1,7	2,4	1,7	min.
Cooling-down time to 200 ºC		5,5	6,5	5,5	6,5	5,5	6,5	min.
Working position		Indifferent
Elstein MPO mounting profiles are made from stainless steel and are used to hold and fix HLS and IRS series radiators.		MPO 248 x 33 mm.
		MPO/2 122 x 33 mm.

Model ISN

Elstein ISN rod radiators are ceramic infrared radiators, designed for surface ratings of up to 72 kW/m² and operating temperatures of up to 750 °C.
Within the product group of the ceramic infrared rod radiators only the radiators of the ISN series have the Elstein standard socket.
The Elstein standard socket makes a simple fixing to the mounting sheet possible. If required an exchange against other Elstein radiator types with standard socket is possible.The rod shaped design makes ISN series radiators preferably suitable for linear heating tasks.

Technical Details
Models at 230 V			ISN Ø16 x 245 mm.	400	600	W
			ISN/2 Ø16 x 122 mm.	200	300	W
Models with incorporated thermocouple				TCK
Typical operating temperature				550	650	ºC
Maximum permissible temperature				750	750	ºC
Wavelength range				2 - 10		µm
Heating-up time (63 % of the operating temperature)				2,4	1,7	min.
Cooling-down time to 200 ºC				5,5	6,5	min.
Working position				Indifferent
	Reflectors	REO 250
		REO 125

Model FSL

Elstein FSL long panel radiators are ceramic infrared emitters with a low overall height, designed for operating temperatures up to 700 °C and surface ratings up to 45 kW/m².

They have two sockets with integrated twisted litz fixing wires, so that FSL radiators are easy to install and space-saving. No special pre-punched holders or reflector plates are required for the assembly.

FSL series radiators are particularly suitable for lamellar heating tasks due to their long narrow design.

Technical Details
Models & Power at 230 V	FSL	326 x 37 mm.	600	W
	FSL/2	163 x 37 mm.	300	W
	Model with thermocouple T-FSL	326 x 37 mm.	600	W
	Model with thermocouple T-FSL/2	163 x 37 mm.	300	W
Typical operating temperature			670	ºC
Maximum surface temperature			700	ºC
Wavelength range			2 - 10	µm
Heating-up Time (63 % of normal running temperature )			3	min
Cooling-down time to reach 200 ºC			8,5	min

Model SBM

Elstein SBM rod radiators are dark ceramic infrared radiators with surface ratings of up to 36.0 kW/m². SBM radiators have been developed for use in infrared heated cabins and due to their long-wave infrared radiation gently and pleasantly heat the human body.

Furthermore, SBM rod radiators can also be used for other heating tasks. Due to their long oval design, they are particularly suitable for linear heating or for space-saving installations, if low installed heights have to be achieved.

Technical Details
Models & Power at 230 V	SBM/300 20 x 30 x 300 mm.	200	300	-	-	W
Models & Power at 230 V	SBM/450 20 x 30 x 450 mm.	-	-	300	400	W
Typical operating temperature		490	590	440	510	ºC
Maximum surface temperature		600	600	600	600	ºC
Wavelength range		2 - 10				µm
Heating-up Time (63 % of normal running temperature )		2,5	2,3	2,5	2,4	min.
Cooling-down time to reach 200 ºC		5,0	6,0	5,0	5,5	min.
Weight		115	115	160	160	g
Working postion		Indifferent

Model KSS/60

Elstein KSS/60 spherical radiators are ceramic infrared emitters which are designed for operating temperatures up to 750 °C and surface ratings of up to 38 kW/m².

Three dimensional heating panels can be built with KSS/60 sphere radiators by arranging the radiators in higher or lower position.

This enables the adaptation of the heating panel to the design of three dimensional components. Such components are for example door trims for vehicles.

CARACTERISTICAS
Models & Power at 230 V	KSS/60	Ø 60 x 60 mm	250	W
Models & Power at 230 V	Model with thermo-coupler KSS/60	Ø 60 x 60 mm	TCK	W
Surface rating			38,0	KW/m2
Typical operating temperature			670	ºC
Maximum surface temperature			750	ºC
Wavelength range			2 - 10	µm

Model RSA

The RSA models are emitters of infrared beams. They are specially made for laboratory applications.

Technical Details
Models & Power at 230 V	RSA	Dimensions Diameter interior 55 mm Diameter exterior 95 mm	Power as needed
They are always made under specification ( consult quantities)

Model RFS

Elstein RFS round panel radiators are ceramic infrared radiators with round design and can be used for operating temperatures up to 700 °C and surface ratings up to 46 kW/m².

Radiators of the RFS series are used for example in small thermoform devices of dental technique. Such devices are used for manufacturing dental prostheses.
The round design enables additionally an optimal heating of corresponding materials to be heated like the bottom of bottles.

Technical Details
Models & Power at 230 V	RFS /100	Ø 100 mm	150	250	400	-	-	W
Models & Power at 230 V	RFS /125	Ø 125 mm	-	-	-	250	500	W
Surface rating			17.3	28.9	46.2	18.8	37.6	kW/m²
ypical operating temperature			300	430	610	330	5500	ºC
Maximum surface temperature			700	700	700	700	700	ºC
Weight			145			175		g
Wavelength range			2 - 10					µm

Model SSH

Elstein SSH switchboard heaters are ceramic infrared radiators in round design with surface ratings of up to 18 kW/m². The typical operating temperature is 200 °C up to 280 °C.

The SSH infrared radiators are used for switchboards in order to avoid the formation of condensation water. SSH switchboard heaters are delivered with a fixing clip, which allows an easy mounting of the SSH radiator onto 35-mm standard rails. Such standard rails have been mounted already in many switchboards.

Technical Details
Models at 230 V	SSH Ø85 mm.	60	100	W
Typical operating temperature		200	280	ºC
Maximum surface temperature		700	700	ºC
Wavelength range		2 - 10		µm
Weight		75		g

Model IRS/K

Elstein IRS/K rod radiators are ceramic infrared radiators, which are available in different lengths of up to 300 mm and surface ratings of up to 75 kW/m².

Unlike the IRS series radiators, which have the leads running through the mounting sockets on each side, the leads of IRS/K series lie only on one side (see figure 1 in pdf).

Thus IRS/K radiators make the heating of the interior of hollow bodies like tubes or bottles possible.

Linear heating tasks that require one-sided leads can be solved too.

Technical Details
Models at 230 V	IRS/K Ø16 x 125 mm. until IRS/K Ø16 x 300 mm	125 a 300	W
		300 a 750	W
Models with incorporated thermo-couple		TCK
Surface rating		30 a 75	kW/m2
Typical operating temperature		400 a 700	ºC
Maximum surface temperature		750	ºC
Wavelength range		2 - 10	µm
Working position		Indifferent

Model IOT

Elstein IOT/75 and IOT/90 radiators are ceramic infrared dark radiators with E27 screw caps. The standardised E27 thread allows easy and safe installation, as the radiators can be screwed in like bulbs into porcelain or metal sockets with porcelain insert.

Due to their simple connection, IOT/75 and IOT/90 infrared radiators are suitable both for individual operation and for configuring groups of radiators. They have diverse applications, in particular they range over terrariums/pets and livestock, breeding, medical and catering technology.

Technical Details
Models & Power at 230 V	IOT/75		IOT/90		-
Models & Power at 230 V	60	100	150	250	W
Typical operating temperature	290	380	420	490	ºC
Surface rating	8.6	14.4	15.0	25.0	KW/m²
Maximum permissible temperature	530	530	530	530	ºC
Wavelength range	3 - 10				µm
Heating-up Time	10		8		min.
Weight	75		140		gr
Dimensions	Ø 75 x 95		Ø 90x 135		mm
Working position	Indifferent				-

Model IPT

Elstein IPT radiators are ceramic infrared dark radiators with E27 screw caps.

The standardised E27 thread allows easy and safe installation, as the radiators can be screwed in like bulbs into porcelain or metal sockets with porcelain insert.

Due to their simple connection, IPT infrared radiators are suitable both for individual operation and for configuring groups of radiators.

They have diverse applications, in particular over terrariums/pets and livestock as well as breeding.

Technical Details
Models & Power at 230 V	IPT/75 85 g	60	100	-	-	-	-	W
	IPT/100 150 g	-	-	150	250	-	-	W
	IPT/125 210 g	-	-	-	-	300	500	W
Aluminium Reflector	RIO 125 65 g	-	-	-	-	-	-	-
Surface rating		8,6	14,4	13,2	22,0	18,1	30,3	KW/m2
Typical operating temperature		290	380	370	460	430	510	º C
Maximum surface temperature		530	530	530	530	530	530	º C
Wavelength range		2 - 10						µm

Model FIS

Elstein FIS focus infrared radiators are ceramic IR-dark radiators with reflector made of aluminium and E27 screw caps. The aluminium reflector focuses the infrared radiation being generated by a ceramic rod radiator so that the FIS radiator transmits a high radiation power to a small area. This concentration of radiation power is especially suited for solving tasks dealing with the heating of selective or small areas.

The standardised E27 thread allows easy and safe installation, as the radiators can be screwed in like bulbs into porcelain or metal sockets with porcelain insert.

Technical Details
Models & Power at 230 V	FIS	250	W
Surface rating		12,3	kW/m2
Typical operating temperature		750	ºC
Maximum surface temperature		750	ºC
Wavelength range		2 - 10	µm
Heating-up Time		2	min
Weight		90	gr
Dimensions		Ø 130 x 145	mm
Working position		Indifferent

Model SFH

Elstein SFH super flat radiators are ceramic infrared radiators in flat design.
They reach operating temperatures up to 800 °C and surface ratings up to 64 kW/m²

The radiators of the SFH series are very suited for applications, which require space-saving installation.
The borders of SFH radiators are used as bearing surface on a metal mounting sheet or reflector.
For each radiator a corresponding rounded mounting hole is required to place the heaters into them.

Technical Details
Models & Power at 230 V	SFH 122 x 122 mm 160 g	250	400	600	800	1000	W
	SFH/1 245 x 60 mm. 160 g	250	400	600	800	1000	W
	SFH/2 122 x 60 mm. 85 g	125	200	300	400	500	W
	SFH/4 60 x 60 mm. 45 g	60	100	150	200	250	W
Surface rating		16	25,6	38,4	51,2	64	kW/m²
Typical operating temperature		440	540	630	720	800	º C
Maximum permissible temperature		900	900	900	900	900	º C
Wavelength range		2 – 10					µm

Model MSH/20

Elstein MSH micro system heaters are ceramic infra-red radiators in small design. They reach operating temperatures up to 860 °C and surface ratings up to 100 kW/m².

MSH micro system heaters are used in applications, which require partial heating or drying of small goods and areas. This occurs for example at heating of printed circuit boards.
MSH radiators are suitable both for individual operation and for configuring groups of radiators to an infra-red heating panel.

MODEL at 12V	MSH /20 Weight 3 g	55	W
Surface rating		100	KW/m2
Typical operating temperature		860	º C
Maximum permissible temperature		900	º C
Wavelength range		2 - 10	µm

Terrarium heaters

CERAMIC HEATERS FOR TERRARIOS AND DOMESTIC ANIMALES.
MODELS WITH SCREEN
MODELS EBF 25
	Screen Type	Emitter type	Power W to 230V	Model
	EBO 25 Dimensions 245x100x80mm	HTS/1	250	EBF25-250H
			400	EBF 25-400H
			600	EBF 25-600H
			800	EBF 25-800H
			1000	EBF 25-1000H
		ISN	250	EBF 25-250ISN
			400	EBF 25-400ISN
			600	EBF 25-600ISN
Models EBF12
	Screen Type	Emitter type	Power W a 230V	Model
	EBO 12 Dimensions 130x100x80mm	HTS/2	125	EBF 12-125H2
			200	EBF 12-200H2
			300	EBF 12-300H2
			400	EBF 12-400H2
			500	EBF 12-500H2
		HTS/4	60	EBF 12-60H4
			100	EBF 12-100H4
			150	EBF 12-150H4
			200	EBF 12-200H4
				EBF 12-150H4
		ISN/2	125	EBF 12-12ISN2
			200	EBF 12-200ISN2
			300	EBF 12-300ISN2
Cylindric Models with profile reflector
	Profile type	Emitter type	Power W a 230V	Model
	MPO Dimensions 248x33mm	IRS	400	IRS 400/MPO
	MPO Dimensions 248x33mm	IRS	600	IRS 600/MPO
	Normal 0 21 MPO/2 Dimensions 123x33mm	IRS/2	200	IRS/2 200/MPO2
	Normal 0 21 MPO/2 Dimensions 123x33mm	IRS/2	300	IRS/2 400/MPO2
MODELS WITH E27 SCREW TIP
	Emitter type		Power W a 230V	Model
	IOT/75 Diameter 75x100mm		60	IOT/75/60
	IOT/75 Diameter 75x100mm		100	IOT/75/100
	IOT/90 Diameter 90x140mm		150	IOT/90/150
	IOT/90 Diameter 90x140mm		250	IOT/90/250
	IPT/75 Diameter 75x100mm		60	IPT/75/65
	IPT/75 Diameter 75x100mm		100	IPT/75/100
	IPT/100 Diameter 100x108mm		150	IPT/100/150
	IPT/100 Diameter 100x108mm		250	IPT/100/250
	IPT/125 Diameter 125x115mm		300	IPT/125/300
	IPT/125 Diameter 125x115mm		500	IPT/125/500

SSV Sulphur Vaporiser

	Sulphur Vaporiser SSV
Sulphur Vaporiser with E27 screw tip. For use in hothouses
It can be substituted for existing ceramic lamps.
Power 75W a 230V

FSR - LCR - HFS - FSF - HTS - SHTS - HSR - HLS - HLF - IRS - ISN - FSL - SBM - KSS/60 - RSA - RFS
SSH - IRS/K - IOT - IPT - IPO - FIS - SFH - MSH/20 - Terrarium heaters - SSV Sulphur Vaporiser

ULTRA-VIOLET LAMPS FOR GERMICIDAL & INDUSTRIAL APPLICATIONS
	INDUSTRIAL	GERMICIDAL
MEDIUM PRESSURE MERCURY VAPOR LAMPS
LOW PRESSURE MERCURY VAPOR LAMPS
LOW PRESSURE AMALGAM LAMPS, LINEAL MODELS
LOW PRESSURE AMALGAM LAMPS, U-SHAPE, SPIRAL & OTHER FORM MODELS
UV BLACKLIGHT LAMPS
STANDARD GERMICIDAL UV LAMPS
UV EQUIPMENT WITH LEDs

MEDIUM PRESSURE MERCURY VAPOR LAMPS

MEDIUM PRESSURE MERCURY VAPOR LAMPS

Aplications: Medium pressure mercury UV lamps are mainly used for two applications:

• For UV curing and drying
• For UV desinfection

Characteristics of medium pressure UV lamps
Quartz tube: - Natural quartz (OF) - Natural doped quartz (OG) - Sinthetic quartz (OG)
Exterior diameter: Betwween 10 mm & 38 mm
Length of arc: from 50mm to 2500mm Power range: from100W to 60kW
Shape of lamp body: Lineal - U-shaped - Spiral - Other forms on request
Maximum nominal power density (per unit length) - from 80W/cm to 300W/cm * - from 80 W/cm to 120 W/cm - from 80 W/cm to 250 W/cm * -
Useful life (Tested in laboratory and depending on the power of the lamp). One ignition a day - from 1000h to 1500h * - from 1500h to 5000h - from 1500h to 5000h * -
Surface temperature (Tested in laboratory and depending on the power of the lamp) from 600 ºC to 900 ºC
(OF) Ozone free (OG) Ozone generator * Curing lamp Germicidal lamp * Oxidation lamp

LOW PRESSURE MERCURY VAPOR LAMPS

LOW PRESSURE MERCURY VAPOR LAMPS

Low pressure quartz UV lamps, also called "germicidal lamps", use UVC light to obtain the rapid sterilization of bacteria, molds, fungi, viruses and microorganisms in both air and water.
In this type of lamp about 40% of electrical energy is converted directly into UVC radiation with monochromatic emissions at 254 nm for germicidal applications and at 185 nm for surface oxidation.

Characteristics of low pressure UV lamps
Quartz tube: - Natural quartz (OF) - Natural doped quartz (OG) - Sinthetic quartz (OG)
Exterior diameter: between 10 & 38 mm
Length of arc: from 50 mm up to 2000 mm Power range: from 5 W up to 200 W
Shape of lamp body: Lineal - U-shaped - Spiral - Other forms on request
Maximum nominal power density (per unit length) 1W/cm
Maximum power of UV emission (per unit length) 0,4W/cm
Useful life up to 16000 hours Loss of efficiency at the end of the useful life 40%
Working temperature from 5 ºC to 40 ºC with stable UVC emission
(OF) Ozone free (OG) Ozone generator

LOW PRESSURE AMALGAM LAMPS, LINEAL MODELS

LOW PRESSURE AMALGAM LAMPS, LINEAL MODELS

Low-pressure amalgam UV lamps contain not only mercury but a solid amalgam or mercury alloy with other metals.
Low-amalgam lamps represent the optimum solution for the disinfection and ultraviolet oxidation of water, air and surfaces, since they combine very long life (up to 20,000 hours) and optimum UVC efficiency at 254 nm (up to 45%) at A much higher power density than traditional low pressure lamps and mercury medium pressure lamps.

Amalgam UV lamps, thanks to high power and long life, are an economically advantageous solution for ultraviolet disinfection systems since they contain significantly the operating costs derived from the decrease in the number of installed lamps, electronic components And maintenance costs.

A special quartz coating process allows UV lamps at low amalgam pressure to maintain virtually constant germicidal action throughout the lamp life cycle

Characteristics of low pressure amalgam UV lamps
Quartz tube: - Natural quartz (OF) - Natural doped quartz (OG) - Sinthetic quartz (OG)
Exterior diameter: Between 10 & 38 mm
Length of arc: from100 mm up to 2600 mm Power range: from 50 to 1500 W
Shape of lamp body: Lineal - U-shaped - Spiral - Other forms on request
Maximum nominal power density (per unit length) 6 W/cm
Maximum power of UV emission (per unit length) 4W/cm
Coefficient of transformation of electric power in UVC radiation 254 nm up to 45%
Useful life (Measured in laboratory, and depending on lamp power) up to 20000 hours
Working temperatura from 1 ºC to 60 ºC with stable UVC emission
Loss of efficiency at the end of the useful life from 5 to 20%
(OF) Ozone free (OG) Ozone generator

LOW PRESSURE AMALGAM LAMPS, U-SHAPE, SPIRAL & OTHER FORM MODELS

LOW PRESSURE AMALGAM LAMPS, U-SHAPE, SPIRAL & OTHER FORM MODELS

Experience in the manufacture of UV lamps and quartz glass processing has led to the manufacture of compact low pressure mercury and amalgam lamps with non-linear shapes (HCL models) for applications where it is desired to maximize the germicidal power in Small spaces.
Here are some examples.

Varying shapes of low pressure amalgam lamps

HSSL amalgam lamps can be manufactured
In different forms and models as shown in the attached figure.

The 6 forms are available for a tube length of 1595mm with maximum diameters of 10 -12 -15 -19 -28 & 32 mm.

UV BLACKLIGHT LAMPS

UV BLACKLIGHT LAMPS

Wood lamp (Named from the American scientist Robert Williams Wood) or black light, is meant as a light source that emits electromagnetic radiation prevalently in the range of ultraviolet and omissible, in the field of visible light.

Aplications
A Wood lamp produces light not directly visibile by the human eye, however it can be used to illuminate materials in which ultraviolet radiation induces fluorescence effects. Possible applications of these properties occur in the fight against counterfeiting of banknotes by the use of banknote control or in the search for cracks in metal structures coated with UV-reactive material.

Main features of black light amalgam UV lamps

UV-C short-wave (180 – 280 nm) with peak at 254 nm,
Suitable for chemical, photochemical and chromatographic applications, in microbiology are useful for the identification of bacteria and fungi, for the analysis of fluorescent materials and for the analysis of minerals.

UV-B Medium-wave (280 – 320 nm) with peak at 310 nm
Suitable for chromatographic and GEL analyzes, for subtle layer tests, DNA / RNA electrophoresis test tests and for mineral analyzes.on aptas para análisis cromatográficos y GEL, para tests en capas sutiles, para test de investigación de la electroforesis ADN / ARN y para los análisis de minerales.

UV-A Long-wave ( 320 – 380 nm) with peak at 366 nm
Suitable for many organic applications, fluorescence tests, food industry, control of banknotes and documents, artistic restorations, in many Microbiology tests, in dermatological field or for skin diseases and for the care of favism or also for geological inspections.

STANDARD GERMICIDAL UV LAMPS

STANDARD GERMICIDAL UV LAMPS

Standard Germicidal Lamps

Germicidal lamps provide a highly efficient source of UV light for medical and commercial applications.
They are aviable in single-ended and double-ended formats with widely-used G10.2q, G5, G13, G23 and 2G11 bases.
Utilise low pressure mercury vapour to produce UV light at 253.7nm
which is very effective for germicidal uses.

Applications
Hospitals
Schools
Hotels
Air or object disinfection
Offices
Domestic
Operating rooms
Medical disinfection
Photochemical processes
Bacticlean
Pond Filters

UV EQUIPMENT WITH LEDS

UV EQUIPMENT WITH LEDS

UV Equipement With Leds
Fast, flexible curing and drying Wavelength 365 - 405nm High intensity Air cooled Long life Instant on/off; no warming/cooling phase Dimmable Life of over 20,000 hours

Medium-wave infrared emitters

Medium-wave quartz IR lamps are particularly suitable for heating surfaces and materials of reduced thickness.
Plastic, water and other specific solvents particularly absorb radiation at this wavelength.

Key Features of medium wave Quartz IR Lamps:

Diameters in monotube emitters - 10 mm, 12 mm, 13 mm, 16 mm, 18 mm, 26 mm -
Dimensions of the twin tube emitters - 18 x 9 mm, 22 x10 mm, 33 x16 mm -
Range wavelength field 2,2 – 3,2 µm
Maximum Rated Power Density 35 W/cm
Maximum density of power per unit area 60kW/cm²
Filament ignition times in the range: Between 30 and 70 secons
Standard working position: horizontal; On request transmitters for vertical use can be supplied

Fast-Medium-wave infrared emitters

Medium-speed quartz lamps are especially suitable for applications requiring fast medium-wave IR radiation and short-wave on / off reaction times.

Key Features of fast-medium wave Quartz IR Lamps:

Diameters in monotube emitters - 11 mm -
Dimensions of the twin tube emitters - 18 x 8 mm, 23 x11 mm, 34 x15 mm -
Range wavelength field 1,4 – 1,6 µm
Maximum Rated Power Density 50 W/cm
Maximum density of power per unit area 130kW/cm²
Filament ignition times in the range: Between 1 and 3 secons
Standard working position: horizontal; On request transmitters for vertical use can be supplied

Short-wave infra-red emitters

The short-wave radiation has a high heating power and is also especially indicated in processes where an almost immediate time on and off of the lamp (low inertia) is required.
The IR intensity of the short wave is between 1.1 and 1.4 μm
The firing time of the filament is between 1 and 2 seconds

Key Features of Shortwave Quartz IR Lamps:

Diameters in monotube emitters - 13 mm - - 10 mm, 11 mm -
Dimensions of the twin tube emitters: - 18 x 8 mm, 22 x11 mm, 33 x15 mm -
Range wavelength field 1,1 – 1,4 µm
Maximum Rated Power Density 80 W/cm
Maximum density of power per unit area 200kW/cm²
Filament ignition times in the range: Between 1 and 2 seconds
Standard working position: horizontal; On request transmitters for vertical use can be supplied

Short-wave I.R. quartz emitters. FQHS Models

This new generation of high performance short-wave IR emitters have proven superior to other models in a long series of applications.
Its main feature is its special construction.
Two halogen quartz tube transmitters mounted on a flat, quartz, rectangular section with a stainless steel reflector, inside. The outer tube is filled with inert gas before being sealed.
All models are to work in a horizontal position, in case of applications that require work in other positions please consult us. The annexed table shows the technical details of models.

Maximum length 2000 mm.
Minimum length 80 mm.
Maximum power 10 W / cm Heated length

Diameters in monotube emitters - 13 mm -
Dimensions of the twin tube emitters: - 28,5 x 12,5 mm -
Range wavelength field 1,1 – 1,3 µm
Maximum Rated Power Density 100 W/cm
Maximum density of power per unit area: 250kW/cm²
Filament ignition times in the range: Between 1 and 2 seconds
Standard working position: horizontal; On request transmitters for vertical use can be supplied

Short-Wave I.R. emitters mounted on protective housing

Standard Aluminium protective housing		With medium wave emitters
		With short wave emitters
Protective housing in stainless steel, including short wave emitters hihg performance		With FQHS emitters
Short wave infrared heating systems		Infrared indoor heaters
		IP55 infrared outdoor heaters
		Portable infrared heaters
Large paint dryers		VLP10, VLP 20 Series
		VLP 30, VLP 45, VLP 60 series for large areas

Regulation & control equipment

CONTROL EQUIPMENT	Manual adjustment
CONTROL EQUIPMENT	Automatic control panels
COMPONENTS	Timers
	SSR Solid State Relays Thyristor			Thyristor	SSR
	Control equipment SQER pulse generator HW 17 Electronic temperature limiter HCC05 Current Controller HLD Power unit
	PID temperature control electronic regulators	D.Krieger	Elstein	Eliwell	Brainchild